Panic Alarm

The panic alarm feature provides audible and visual alarms which are evident from the exterior of the vehicle. The panic alarm feature requests that the turn signals are flashed and the horn sounds until deactivation. The flashing of the outputs occurs simultaneously. Activation of the panic alarm is accomplished by pressing the panic button on an IKT  whenever the key is in the OFF position. At all other times this feature is disabled. Deactivation of an active panic alarm is accomplished by any of the following actions:

• A second press of the IKT  panic button
• The key is switched out of the OFF position
• A period of 2 minutes and 45 seconds has elapsed since the initial activation