Keyless Entry Keypad

The keypad, is integrated into the B-pillar applique on the driver door, and provides a method for customers to access their vehicle without an IKT  . The keypad feature:

• Locks all doors
• Unlocks the driver door (with stepped unlock enabled)
• Unlocks all doors
• Command the interior lamps on (when unlocking) and off (when locking)
• Programs/erases the customer key code
• Enables/disables auto-unlocking
• Enables/disables autolocking
• Recalls memory seat/power mirror positions (if equipped)

The keypad feature operates independently of key position status, vehicle speed, or transmission position. The keypad is touch sensitive and will not work if gloves are worn. When a keypad button is touched, the keypad buttons illuminate to provide better visibility. If the lock all doors command is entered or 5 seconds have elapsed since the last button press, the illumination is turned off.

Each vehicle equipped with a keypad is programmed with a 5-digit entry code. This code is provided to the customer through a wallet card in the Owner's Literature. In addition, this code is available through a scan tool and is also printed on the SJB  label. When entering codes, each digit must be entered within 5 seconds of the previous button press. The SJB  accepts the programming of 3 personal entry codes. Refer to KEYLESS ENTRY KEYPAD CODE PROGRAMMING  for programming information.