LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Passive Anti-Theft System (Pats) >> Removal And Installation >> Passive Anti-Theft System (PATS) Transceiver >> Removal and Installation

Removal and Installation

  1. Pulling firmly in a rearward direction, remove the steering column opening cover.
  2. Remove the 3 screws and the lower steering column shroud.
  3. Disconnect the Passive Anti-Theft System (PATS) transceiver electrical connector.
  4. Release the tabs and remove the PATS  transceiver.
  5. NOTE: Replacement of the PATS  transceiver does not require the PATS  keys to be programmed into the Instrument Cluster (IC) again.

    To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals