LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Removal And Installation >> Wiper Pivot Arm - Rear >> Removal and Installation

Removal and Installation

  1. Open the wiper pivot arm nut cover.
    Fig 1: Locating Wiper Pivot Arm Nut Cover
    G06071255Courtesy of FORD MOTOR CO.
  2. Remove the wiper pivot arm nut.
    • To install, tighten to 12 Nm (106 lb-in).
    Fig 2: Locating Wiper Pivot Arm Nut
    G06071256Courtesy of FORD MOTOR CO.
  3. Remove the wiper pivot arm.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals