LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Parking Aid System >> Removal And Installation >> Video Camera >> Removal and Installation

Removal and Installation

  1. Remove the liftgate trim panel. For additional information, refer to HANDLES, LOCKS, LATCHES AND ENTRY SYSTEMS .
  2. Remove the Ford oval emblem by carefully prying the emblem away from the emblem bezel with a suitable pry tool.
  3. Remove the 3 Ford oval emblem bezel bolts.
  4. Remove the Ford emblem bezel from the tailgate.
    • Disconnect the electrical connector.
  5. Remove the video camera cover.
  6. Remove the video camera.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals