LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center, & Warning Chimes >> Removal And Installation >> Message Center Switch >> Removal and Installation

Removal and Installation

  1. Pull the RH instrument panel trim straight out to release the retaining clips and remove the trim panel.
    • Disconnect the electrical connectors.
  2. Press the retaining tabs and remove the message center switch.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals