LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Diagnosis And Testing >> Steering Column Switches >> Pinpoint Tests >> Pinpoint Test D: No Power in START >> Normal Operation

Normal Operation

When the ignition switch is in the START position, voltage is sent to the One-Touch Integrated Start (OTIS) diode in the Battery Junction Box (BJB) and the PCM along circuit CDC35 (BU/WH).

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals