LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Explorer 4.6 8, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Instrument Cluster Illumination & Instrument Panel Illumination) >> Removal And Installation >> Instrument Panel Dimmer Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel side finish panel.
  2. NOTE: The headlamp switch is removed by pushing from behind.
  3. Remove the headlamp switch.
    • Disconnect the electrical connectors.
  4. NOTE: The instrument panel dimmer switch is removed by releasing the tabs and pulling from behind.
  5. Release the tabs and remove the instrument panel dimmer switch assembly.
  6. To install, reverse the removal procedure.