Removal And Installation
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the 2 wiper pivot arm nut covers.
- Remove the 2 wiper pivot arm nuts and the 2 wiper pivot arms.
- Tighten to 28 N.m (21 lb-ft).
- To install, reverse the removal procedure.
- Adjust the wiper pivot arms. For additional information, refer to Wiper Blade and Pivot Arm Adjustment .
NOTE:
New wiper pivot arms need to be installed as an assembly.