LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Explorer 4.6 8, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Seat System - Seating) >> Diagnostic Tests >> Seats >> Pinpoint Tests >> Pinpoint Test F: The Power Seat Moves But is Noisy >> Pinpoint Test F: The Power Seat Moves But Is Noisy

Pinpoint Test F: The Power Seat Moves But Is Noisy

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. F1 CHECK THE TRACK ALIGNMENT 
    • Check the alignment of the track to the floor and the track to the seat.
    • Is the track out of alignment? 
    1. YES  : ALIGN the track to the seat and the floor. TEST the system for normal operation.
    2. NO  : Go to  F2.
  2. F2 CHECK THE SEAT TRACK INTEGRITY 
    • While operating the seat, inspect the seat track for binding and/or damage.
    • Does the seat track appear to be free from damage and binding? 
    1. YES  : Go to  F3.
    2. NO  : INSTALL a new front seat track. REFER to Seat Track . TEST the system for normal operation.
  3. F3 CHECK THE SEAT MOTOR INTEGRITY 
    • While operating the seat, listen for excessive seat motor noise. Compare the noise to a similar vehicle for reference.
    • Is the seat motor noise excessive? 
    1. YES  : INSTALL a new front seat track. REFER to Seat Track . TEST the system for normal operation.
    2. NO  : Allow the customer to compare to a similar vehicle to determine the amount of motor noise is product characteristic. TEST the system for normal operation.
scientia non olet · About LEMON Manuals