LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Explorer 4.0 E, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Wiper System & Washer System) >> Removal And Installation >> Wiper/Washer Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 3 screws and the steering column upper and lower shrouds.
  2. Remove the 2 windshield wiper/washer switch screws.
  3. Disconnect the electrical connector and remove the windshield wiper/washer switch.
  4. To install, reverse the removal procedure.