LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Explorer 4.0 E, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Handles, Locks, Latches & Entry Systems) >> Removal & Installation >> Luggage Compartment Lid Latch >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the luggage compartment lid latch electrical connector.
  2. Disconnect the luggage compartment lock cylinder cable from the lock cylinder.
  3. Remove the bolts and the luggage compartment lid latch.
    • To install, tighten to 12 Nm (9 lb-ft).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals