LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Explorer 4.0 E, 4WD >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Cluster Illumination & Instrument Panel Illumination >> Removal And Installation >> Instrument Cluster Bulb

Instrument Cluster Bulb

  1. Remove the instrument cluster (IC). For additional information, refer to INSTRUMENT CLUSTER (IC), MESSAGE CENTER, AND WARNING CHIMES article.
    2. NOTE: To remove the illumination bulb, rotate the bulb one quarter turn counterclockwise and lift out from the IC.
  2. Remove the illumination bulb(s).
    3. Fig 1: Identifying Instrument Cluster Bulb
    GF0027967Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals