LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Explorer 4.0 E, 4WD >> Repair and Diagnosis >> Brakes >> Parking Brake System - Parking Brake & Actuation >> Removal And Installation >> Parking Brake Shoes >> Installation

Parking Brake Shoes: Installation

  1. Position the parking brake shoes and attach the retracting spring.
  2. Install the 2 parking brake shoe hold-down pins and springs.
  3. Install the parking brake shoe adjusting screw spring.
    4. NOTE: Completely retract the parking brake adjusting screw before installation.
  4. Install the brake shoe adjusting screw.
  5. Adjust the parking brake shoe. For additional information, refer to Parking Brake Shoe Adjustment .
  6. Reload the tension on the parking brake cable. For additional information, refer to Parking Brake Cable Tension Release .
scientia non olet · About LEMON Manuals