LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Explorer 2WD V6-4.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair >> Accessory Drive Belt Tensioner

Accessory Drive Belt Tensioner




Accessory Drive Belt Tensioner - 4.0L SOHC

Removal and Installation

1. Rotate the accessory drive belt tensioner counterclockwise and remove the drive belt.





2. Remove the bolt and the accessory drive belt tensioner.
- To install, tighten the bolt to 47 Nm (35 lb-ft).

3. To install, reverse the removal procedure.
- For correct belt routing, refer to Accessory Drive Description and Operation, Accessory Drive Belt Routing, Front End Accessory Drive (FEAD) - 4.0L SOHC in the Description and Operation.

scientia non olet · About LEMON Manuals