LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Explorer 2WD V6-4.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Lifter / Lash Adjuster >> Service and Repair >> Removal and Replacement >> Hydraulic Lash Adjuster

Hydraulic Lash Adjuster




Hydraulic Lash Adjuster





Removal and Installation

1. Remove the camshaft roller followers. For additional information, refer to Camshaft Roller Follower Camshaft Roller Follower.

2. NOTE: Mark each hydraulic lash adjuster to make sure it is returned to its original position.

Remove the hydraulic lash adjusters.

3. NOTE: The hydraulic lash adjusters must be installed in their original positions.

NOTE: Lubricate the hydraulic lash adjusters with clean engine oil.

To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals