LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Expedition EL RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Instrument Panel & Console) >> Removal And Installation >> Console Finish Panel - Floor >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply the parking brake.
  2. Place the transmission range selector lever in the No. 1 position.
  3. Remove the instrument panel center finish panel and disconnect the cigar lighter electrical connector.
  4. Release and remove the floor console finish panel.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals