LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Expedition EL RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Charging System (Battery, Mounting And Cables)) >> Removal And Installation >> Battery Tray >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery. For additional information, refer to Battery  .
  2. Remove the 4 bolts and the battery tray.
    • To install, tighten to 12 Nm (9 lb-ft).
  3. To install, reverse the removal procedure.