LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Escape Hybrid, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel & Console >> Removal And Installation >> Instrument Panel Finish Panel - Center, Middle >> Removal and Installation

Removal and Installation

  1. Remove the upper instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL FINISH PANEL - CENTER, UPPER .
  2. Remove the lower instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL FINISH PANEL - CENTER, LOWER .
  3. Remove the 4 middle instrument panel center finish panel screws.
  4. Remove the middle instrument panel center finish panel.
    • Pull outward to release the retaining clips.
    • Disconnect the electrical connectors.
  5. To install, reverse the removal procedure.
    • Make sure to align the trim panel retaining clips to the retaining clip holes in the instrument panel.
scientia non olet · About LEMON Manuals