DTC P2131: - Throttle/Pedal Position Sensor/Switch F Circuit Range/Performance
DTC P2131: - THROTTLE/PEDAL POSITION SENSOR/SWITCH F CIRCUIT RANGE/PERFORMANCE
| Description: | The accelerator pedal position (APP) sensor fault flag is set for sensor 3 by the powertrain control module (PCM), indicating the signal is out of the normal self-test operating range. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An APP3 sensor PID reading may indicate a concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DK . | ||