DTC P0325: - Knock Sensor 1 Circuit (Bank 1)
DTC P0325: - KNOCK SENSOR 1 CIRCUIT (BANK 1)
| Description: | The knock sensor (KS) detects vibrations upon increase and decrease in engine RPM. The knock sensor generates a voltage based on this vibration. A DTC is set if the voltage goes outside a calibrated level. |
||
| Possible Causes: |
|
||
| Diagnostic Aids: | A knock sensor voltage greater than 0.5 volt with the ignition ON engine OFF indicates a concern is present. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | GO to Pinpoint Test DG . | GO to Pinpoint Test DG . |