D-Pillar Trim Panel

D-PILLAR TRIM PANEL

Exploded View

Taurus, Sable (Part 1):

Taurus, Sable (Part 2):

Taurus X (Part 1):

Taurus X (Part 2):

Removal and Installation
1. Remove the C-pillar trim panel.
2. If equipped with side curtain air bags, remove the screw from the D-pillar.
3. Remove the D-pillar.
- Pull the front inboard edge of the D-pillar trim panel down to release the retaining clips.
- Gently pull the outboard retaining clips down.
- Pull the D-pillar trim panel toward the front of the vehicle to remove.

4. To install, reverse the removal procedure.