C-Pillar Trim Panel

C-PILLAR TRIM PANEL

Exploded View

Taurus, Sable (Part 1):

Taurus, Sable (Part 2):

Taurus X (Part 1):

Taurus X (Part 2):

Removal and Installation
1. Remove the rear seat bolster.
2. Remove the C-pillar trim panel screw cover.
3. Remove the C-pillar trim panel screw.
4. Remove the C-pillar trim panel.
- Pull the forward bottom edge of the lower C-pillar toward the center of the vehicle.
- Separate the lower C-pillar from the D-pillar trim panel.
- Position the C-pillar trim panel toward the inside of the vehicle.
- Separate the C-pillar trim panel from the rear safety belt.

5. To install, reverse the removal procedure.