Test F: The Roof Opening Panel Switch Illumination Is Inoperative

PINPOINT TEST F: THE ROOF OPENING PANEL SWITCH ILLUMINATION IS INOPERATIVE

Normal Operation
When the accessory delay relay energizes, voltage is supplied to the roof opening panel switch through circuit CBP41 (BU), turning on the switch illumination. The switch illumination is grounded through circuit CPR39 (VT/WH), from the roof opening panel module.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Roof opening panel switch

F1-F2:

F2 Continued: