LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Fusion S, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster (Ic), Message Center, And Warning Chimes >> Removal And Installation >> Instrument Cluster (IC) Lens >> Removal And Installation

Removal And Installation

  1. Remove the instrument cluster (IC). For additional information, refer to Instrument Cluster (IC) .
  2. Remove the screw.
  3. Fig 1: Locating Instrument Cluster Lens Screw
    GF0030400Courtesy of FORD MOTOR CO.
  4. Release the 8 tabs and remove the lens.
  5. Fig 2: Locating Instrument Cluster Lens Tabs
    GF0030401Courtesy of FORD MOTOR CO.
  6. To install, reverse the removal procedure.