Seat Cushion - Third Row

SEAT CUSHION - THIRD ROW

Third Row Seat Cushion (Part 1):

Third Row Seat Cushion (Part 2):

Disassembly and Assembly
1. Remove the third row seat from the vehicle.
2. Remove the third row cushion.
3. Release the cushion trim cover J-clips attached to the bottom of the cushion frame.
4. Remove the cushion foam pad and trim cover from the cushion frame.

5. CAUTION: Use care when separating the seat back trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the backrest foam pad.

Invert the cushion trim cover, release the hook-and-loop strips and separate the cushion trim cover from the cushion foam pad.

6. To assemble, reverse the disassembly procedure.