A-Pillar Trim Panel

A-PILLAR TRIM PANEL

Exploded View

Explorer And Mountaineer:

Explorer Sport Trac:

Removal and Installation
1. Remove the 2 assist handle bolt covers.
2. Remove the 2 assist handle bolts.
- To install, tighten to 10 Nm (89 lb-in).

3. Remove the assist handle.
4. Position the door opening weatherstrip aside.

5. NOTE: The clip on the LH A-pillar trim panel must remain in the sheet metal. The clip comes off the A-pillar trim panel when the panel is removed.

Remove the A-pillar trim panel.

6. To install, reverse the removal procedure.