Drive Belt Tensioner: Service and Repair

Accessory Drive Belt Tensioner - 4.6L (3V)

Front End Accessory Drive (FEAD) - Exploded View, 4.6L (3V):

Removal and Installation
1. Remove the air cleaner outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
2. Rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt.





3. Remove the bolts and the accessory drive belt tensioner.
^ To install, tighten to 25 Nm (18 lb-ft).
4. To install, reverse the removal procedure.