LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Explorer 2WD V6-4.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Idler Pulley >> Service and Repair

Idler Pulley: Service and Repair

Accessory Drive Belt Idler Pulley - 4.0L SOHC

Front End Accessory Drive (FEAD) - Exploded View, 4.0L SOHC:





Removal and Installation
1. Rotate the accessory drive belt tensioner counterclockwise and remove the drive belt.





2. Remove the bolt and the accessory drive belt idler pulley.
^ To install, tighten to 47 Nm (35 lb-ft).
3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals