Removal and Replacement

SEAT CUSHION - THIRD ROW

Exploded View

Third Row Seat Backrest:

Third Row Seat Cushion (Part 1):

Third Row Seat Cushion (Part 2):

Removal and Installation
1. Position the backrest to the upright position.
2. Remove the third row seat from the vehicle.

3. NOTE: The backrest must be up to access the bolts.

Remove the latch-to-cushion frame bolt and the hinge-to-cushion frame bolt.
- To install, tighten to 25 Nm (18 lb-ft).

4. From under the front of the cushion frame, release the cushion trim cover from the studs to access the 2 cushion pivot link assembly-to-cushion frame nuts.
5. Remove the 2 cushion pivot link assembly-to-cushion frame nuts. Remove the cushion assembly.
- To install, tighten to 22 Nm (16 lb-ft).

6. To install, reverse the removal procedure.