Ball Joint - Lower: Installation
- Using the C-Frame and Screw Installer/Remover and the Ball Joint Installer/Remover, install the lower ball joint.
- Install the ball joint snap ring.
- Install the wheel knuckle. For additional information, refer to Wheel Knuckle .
NOTE:
Do not damage the lower ball joint boot when installing the C-Frame and Screw Installer/Remover and the Ball Joint Installer/Remover or premature failure of the ball joint may occur.
NOTE:
Make sure the ball joint snap ring is fully seated.
Fig 1: Installing Lower Ball Joint Using C-Frame & Screw Installer/Remover & Ball Joint Installer/Remover