LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Expedition EL RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Transfer Case) >> In-Vehicle Servicing >> Transfer Case Rear Output Shaft Seal >> Installation

Transfer Case Rear Output Shaft Seal: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Using the special tool, install the rear output shaft seal.
    2. Fig 1: Installing Transfer Case Rear Output Shaft Seal
    GF0022942Courtesy of FORD MOTOR CO.
    NOTE: Align the index marks made during removal.
  2. Install the rear driveshaft. For additional information, refer to DRIVESHAFT article.
scientia non olet · About LEMON Manuals