Forward/Overdrive Clutch Assembly - Disassembly: Disassembly

WARNING: This page is about a different car, the 2008 Lincoln Navigator L and 2008 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Remove the direct clutch outer shell retaining ring.

Fig 1: Locating Direct Clutch Outer Shell Retaining Ring

Courtesy of FORD MOTOR CO.

Remove the direct clutch outer shell.

Fig 2: Locating Direct Clutch Hub

Courtesy of FORD MOTOR CO.

Remove the forward clutch drum.

Fig 3: Locating Forward Clutch And Sun Shaft Assembly

Courtesy of FORD MOTOR CO.

NOTE: The bearing may stick in the forward clutch drum.

Remove the intermediate shaft bearing.

Fig 4: Locating Intermediate Shaft Bearing

Courtesy of FORD MOTOR CO.

Remove the intermediate shaft assembly.

Fig 5: Locating Intermediate Shaft Assembly

Courtesy of FORD MOTOR CO.

Remove the overdrive clutch pack from the forward clutch pack.

Fig 6: Locating Overdrive Clutch Pack

Courtesy of FORD MOTOR CO.