Leakage Inspection: Notes
WARNING: This page is about a different car, the 2008 Lincoln Navigator L and 2008 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| UV Leak Detector Kit | 164-R0756 or equivalent |
Material
| Item | Specification |
|---|---|
| Dye-Lite® ATF/Power Steering Fluid Leak Detection Dye 164-R3701 (Rotunda) |
- |
| MERCON® SP Automatic Transmission Fluid XT-6-QSP (US); CXT-6-LSP12 (Canada) |
MERCON® SP |
The transmission has the following parts to prevent external fluid leakage:
- Gaskets
- Lip-type seals
- O-ring seals
- Seal rings
- Seal grommets
- Seal washers
- Thread sealant
Leakage at the transmission pan-to-case gasket often can be stopped by tightening the retaining bolts to specification. Refer to SPECIFICATIONS .
When fluid is found to be leaking between the case and the cooler tube fitting, tighten the fitting to maximum specification.
If leakage is found at the manual control lever shaft, install a new seal.
Check for fluid leaking from the end of the extension housing. Leakage can result from a damaged seal, missing garter spring or worn extension bushing. Install a new seal assembly, bushing or both, as necessary.