Test D: DTCs C1701, C1704, C1707 And C1710 - Sensor Circuit Fault

PINPOINT TEST D: DTCS C1701, C1704, C1707 AND C1710 - SENSOR CIRCUIT FAULT

Normal Operation
Voltage is supplied to the parking aid sensors from the parking aid module (PAM) on circuit LMP07 (BU/WH). The PAM supplies ground to the parking aid sensors on circuit RMP07 (GN/WH). The PAM receives a signal from the parking aid sensors on circuits VMP14 (WH/OG), VMP15 (YE/GN), VMP16 (YE/GY) and VMP17 (YE/OG).







This pinpoint test is intended to diagnose the following:
- Dirty or obstructed parking aid sensor
- Parking aid sensor
- Parking aid bumper harness
- PAM

D1:

D2-D6: