LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Fusion S, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster And Panel Illumination >> Diagnostic Tests >> Instrument Cluster and Panel Illumination >> Pinpoint Tests >> Pinpoint Test A: The Control Illumination Is Inoperative >> Pinpoint Test A: The Control Illumination Is Inoperative

Pinpoint Test A: The Control Illumination Is Inoperative

  1. A1 CHECK THE EXTERIOR LAMP OPERATION 
    • Turn the parking lamps on.
    • Are the parking lamps illuminated? 
    1. YES  : Go to  A2.
    2. NO  : REFER to EXTERIOR LIGHTING to continue diagnosis of the parking lamps.
  2. A2 CHECK FOR CORRECT SJB OPERATION 
    • Disconnect all the SJB connectors.
    • Check for:
      • corrosion
      • damaged pins
      • pushed-out pins
    • Connect all the SJB connectors and make sure they seat correctly.
    • Operate the system and verify the concern is still present.
    • Is the concern still present? 
    1. YES  : INSTALL a new SJB. REFER to MULTIFUNCTION ELECTRONIC MODULES . TEST the system for normal operation.
    2. NO  : The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector.
scientia non olet · About LEMON Manuals