LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Freestar SEL >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Crankshaft Main Bearing Journal Taper and Out-of-Round

Crankshaft Main Bearing Journal Taper and Out-of-Round

NOTE: Refer to the appropriate ENGINE article for the specification.
  1. Measure each of the crankshaft main bearing journal diameters in at least 2 directions at each end of the main bearing journal.
    2. Fig 1: Measuring Crankshaft Journal Diameters
    GF0000181Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals