LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Freestar SEL >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumper System >> Removal And Installation >> Bumper Cover - Rear >> Removal

Bumper Cover - Rear: Removal

  1. Remove the 4 rear bumper screws.
  2. Remove the 3 rear bumper pushpins.
  3. Remove the 5 rear bumper screws.
  4. Remove the rear bumper cover.
  5. Disconnect the parking aid wiring harness electrical connector.
  6. If installing a new bumper cover, remove the parking aid sensors.