Removal And Installation
- Remove the second row bucket seat. For additional information, refer to the owner's literature.
- Remove the second row bucket seat backrest. For additional information, refer to Seat Backrest - Second Row, Bucket .
- Remove the 9 screws and the seat bottom cover.
- Remove the 6 seat riser-to-seat track nuts and remove the seat riser.
- To install, tighten to 25 Nm (18 lb-ft).
- Remove the 4 seat track-to-cushion pan bolts and remove the seat track from the seat cushion.
- To install, tighten to 25 Nm (18 lb-ft).
- Release the J-clips and remove the seat cushion trim cover and foam pad from the seat cushion pan.
- Separate the seat cushion trim cover and foam pad hook and loop fasteners.
- Remove and discard all the hog rings and remove the seat cushion trim cover from the foam pad.
- To install, reverse the removal procedure.
CAUTION:
Use care when separating the seat upholstery from the hook and loop strip or the hook and loop strip can be torn from the seat cushion foam pad.