Axle Shaft: Installation

WARNING: This page is about a different car, the 2007 Ford Pickup and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Lubricate the O-ring seal with lubricant prior to installation of axle shaft.

Install the axle shaft.

Fig 1: Identifying Axle Shaft

Courtesy of FORD MOTOR CO.

NOTE: Coat the threads of the retaining bolts with Stud and Bearing Mount.

Install the axle shaft bolts and tighten.
- Tighten to 109 Nm (80 lb-ft).

Fig 2: Locating Axle Shaft Bolts

Courtesy of FORD MOTOR CO.