LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Edge SEL Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Front Suspension - Four Wheel Drive (4WD) -- F250-F550 Super Duty) >> Removal And Installation >> Stabilizer Bar Link >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the stabilizer link-to-axle nut.
    Fig 1: Removing/Installing Stabilizer Link-To-Axle Nut
    G03917865Courtesy of FORD MOTOR CO.
  2. Remove the nut and bolt, and disconnect the stabilizer bar link from the stabilizer bar.
    Fig 2: Removing/Installing Stabilizer Bar Link Nut And Bolt
    G03917854Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals