LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Freestar Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster System And Panel Illumination >> Removal And Installation >> Instrument Panel Dimmer Switch >> Removal and Installation

Removal and Installation

  1. Disconnect the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES .
    2. NOTE: The headlamp switch assembly is held in place by spring clips located on the headlamp switch.
  2. Remove the headlamp switch assembly.
    • Disconnect the electrical connectors.
  3. Release the tabs and remove the instrument panel dimmer switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals