LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZXW SES, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 794 (Automatic Transmission - 5R110W -- F250-F550 Super Duty) >> Disassembly And Assembly Of Subassemblies >> Forward Hub And Ring Gear >> Assembly

Forward Hub And Ring Gear: Assembly

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. To assemble, reverse the disassembly procedure.
    • Lightly lubricate the thrust washer with petroleum jelly to hold it in place during assembly.
    • When installed, make sure the retaining ring is fully seated in the forward ring gear ring groove. The tips must face downward against the hub.
scientia non olet · About LEMON Manuals