DTC P1114: Intake Air Temperature 2 (IAT2) Circuit Low (Supercharged/Turbocharged Engines)
P1114 - INTAKE AIR TEMPERATURE 2 (IAT2) CIRCUIT LOW (SUPERCHARGED/TURBOCHARGED ENGINES)
| Description: | Indicates the sensor signal is less than the self-test minimum. The IAT2 sensor minimum is 0.2 volt. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the IAT2 PID value. A typical IAT2 temperature should be greater than the IAT1 temperature. Refer to REFERENCE VALUES . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DU . | ||