- Both headlamps are inoperative
|
- Fuse
- Circuitry
- Central junction box (CJB)
|
|
- The low beams are inoperative
|
- Fuse
- Circuitry
- Low beam relay
- Headlamp switch
- Multifunction switch
|
|
- The high beams are inoperative
|
- Fuse
- Circuitry
- High beam relay
- Multifunction switch
|
|
- One low beam headlamp is inoperative
|
- Fuse
- Circuitry
- Headlamp assembly
|
|
- One high beam headlamp is inoperative
|
- Circuitry
- Headlamp assembly
|
|
- The headlamps are on continuously
|
- Circuitry
- Low beam relay
- High beam relay
- Headlamp switch
- Multifunction switch
|
|
- The flash-to-pass feature is inoperative
|
- Circuitry
- Multifunction switch
|
- CARRY OUT the multifunction switch component test. Refer to MULTIFUNCTION SWITCH (13K359)
for component testing.
- If the multifunction switch is OK, REPAIR circuit 15-LE14 (GN/RD). TEST the system for normal operation.
- If the multifunction switch is not OK, INSTALL a new multifunction switch. REFER to STEERING COLUMN SWITCHES
. TEST the system for normal operation.
|