Special Tool(s)

SPECIAL TOOL(S)

Courtesy of FORD MOTOR CO.	Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C)
Courtesy of FORD MOTOR CO.	Adapter for 303-224 (Handle) 205-153 (T80T-4000-W)
Courtesy of FORD MOTOR CO.	Compressor, Valve Spring 303-350 (T89P-6565-A)
Courtesy of FORD MOTOR CO.	Holding Fixture, Dial Indicator Gauge (Output Shaft End Play) 308-216 (T94P-4451-AH)
Courtesy of FORD MOTOR CO.	Set, Shim Selection 308-S217 (T94P-4451-BH)
Courtesy of FORD MOTOR CO.	Installer, Shaft Bearing Cup 308-221 (T94P-7025-BH)
Courtesy of FORD MOTOR CO.	Socket, Input Shaft 308-224 (T94P-7025-EH)
Courtesy of FORD MOTOR CO.	Handle 205-D055 (D81L-400-A)
Courtesy of FORD MOTOR CO.	Installer, Differential Oil Seal 308-222 (T94P-7025-CH)