LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transmission And Clutch System - General Information >> General Procedures >> Gearshift Cable Adjustment

Gearshift Cable Adjustment

    NOTE: Make sure that the gearshift lever is in the NEUTRAL position. Apply the parking brake.
    Fig 1: Locating Lock Tab On Selector Cable
    G04653273Courtesy of FORD MOTOR CO.
  1. Release the lock tab on the selector cable.
    2. NOTE: By placing the shift lever into 4th gear, it locks the small lever into the NEUTRAL position.
    Fig 2: Identifying Gear Shift Lever Position
    G04653274Courtesy of FORD MOTOR CO.
  2. Move the gear shift lever into the 4th gear position.
  3. Depress the lock tab on the selector cable, setting the cable adjustment to the small lever.
    Fig 3: Identifying Lock Tab On Selector Cable
    G04653275Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals