Pinpoint Test F: Hard Shifting
- F1 CHECK THE FLUID LEVEL NOTE: The hydraulic clutch fluid is supplied from the brake master cylinder.
- Key in OFF position.
- Inspect the fluid level in the brake master cylinder reservoir.
- Is the fluid within the MAX and MIN level marks?
Yes : GO to F2.
No : ADD brake fluid and CHECK for leak in the clutch and brake system. TEST the system for normal operation.
- F2 CHECK THE CLUTCH PEDAL FREE PLAY
- Depress the clutch pedal lightly by hand.
- Measure the distance the clutch pedal travels.
- Is the clutch pedal free play within 1-3 mm (0.04-0.12 inch)?
Yes : DIAGNOSE hard shifting concern. REFER to MANUAL TRANSAXLE-TRANSMISSION .
No : INSPECT the clutch pressure plate for wear or damage. REPAIR as necessary. TEST the system for normal operation.