Clutch Slave Cylinder: Removal
WARNING:
Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice. In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety Data Sheet (MSDS) if available. Failure to follow these instructions may result in personal injury.
CAUTION:
Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water. If spilled on a plastic surface, wipe up immediately.
- Remove the transaxle. For additional information, refer to MANUAL TRANSAXLE-TRANSMISSION .
- Clean any grease and foreign material from the input shaft.
- Remove and discard the clutch slave cylinder.