LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Transmission >> Clutch >> Clutch Control System >> Removal And Installation >> Clutch Slave Cylinder >> Installation

Clutch Slave Cylinder: Installation

    CAUTION: Do not apply grease on any area of the clutch slave cylinder.
  1. Install a new clutch slave cylinder and seal.
    • Tighten to 10 Nm (89 lb-in).
  2. Install the transaxle. For additional information, refer to MANUAL TRANSAXLE-TRANSMISSION .
  3. Bleed the clutch hydraulic system. For additional information, refer to MANUAL TRANSAXLE-TRANSMISSION AND CLUTCH - GENERAL INFORMATION .
scientia non olet · About LEMON Manuals